LinuxBIOS Boot Sequence
From PEL Wiki
| Console Output | Source |
|---|---|
| ^@^@ü^@^@ | hex 00 00 fc 00 00 |
| LinuxBIOS-1.1.8_mgw_s2895_Fallback Thu May 25 15:02:11 MDT 2006 starting... | |
| (0,1) link=01 | |
| (1,0) link=02 | |
| 02 nodes initialized. | northbridge/amd/amdk8/coherent_ht_car.c |
| SBLink=00 | northbridge/amd/amdk8/incoherent_ht.c |
| | | |
| NC node|link=02 | |
| busn=40 | |
| NC node|link=10 | |
| busn=80 | |
| ht reset - | |
| LinuxBIOS-1.1.8_mgw_s2895_Fallback Thu May 25 15:02:11 MDT 2006 starting... | |
| (0,1) link=01 | |
| (1,0) link=02 | |
| 02 nodes initialized. | |
| SBLink=00 | |
| NC node|link=00 | |
| NC node|link=02 | |
| busn=40 | |
| NC node|link=10 | |
| busn=80 | |
| SMBus controller enabled | southbridge/nvidia/ck804/ck804_early_smbus.c |
| Ram1.00 | sdram.c |
| Ram1.01 | |
| Ram2.00 | |
| Ram2.01 | |
| Ram3 | |
| Initializing memory: done | raminit.c |
| Initializing memory: done | |
| Ram4 | sdram.c |
| v_esp=000cfe88 | post_cache_as_ram.c or post_cache_as_ram_auto.c |
| testx = 5a5a5a5a | |
| Copying data from cache to ram -- switching to use ram as stack... Done | post_cache_as_ram.c |
| testx = 5a5a5a5a | |
| Disabling cache as ram now | |
| Clearing initial memory region: Done | raminit.c or cache_as_ram.c or cache_as_ram_auto.c |
| Copying LinuxBIOS to ram. | |
| src=fffe0000 | |
| dst=00004000 | |
| linxbios_ram.bin length = 00028330 | |
| Jumping to LinuxBIOS. | copy_and_run.c |
| LinuxBIOS-1.1.8_mgw_s2895_Fallback Thu May 25 15:02:11 MDT 2006 booting... | |
| Enumerating buses... | |
| APIC_CLUSTER: 0 enabled | device_util.c |
| PCI_DOMAIN: 0000 enabled | |
| PCI: 00:18.3 siblings=1 | |
| CPU: APIC: 00 enabled | |
| CPU: APIC: 11 enabled | |
| PCI: 00:19.3 siblings=1 | |
| CPU: APIC: 12 enabled | |
| CPU: APIC: 13 enabled | |
| PCI: pci_scan_bus for bus 0 | |
| PCI: 00:18.0 [1022/1100] enabled | |
| PCI: 00:18.1 [1022/1101] enabled | |
| PCI: 00:18.2 [1022/1102] enabled | |
| PCI: 00:18.3 [1022/1103] enabled | |
| PCI: 00:19.0 [1022/1100] enabled | |
| PCI: 00:19.1 [1022/1101] enabled | |
| PCI: 00:19.2 [1022/1102] enabled | |
| PCI: 00:19.3 [1022/1103] enabled | |
| PCI: 00:00.0 [10de/005e] enabled | |
| PCI: 00:00.0 [10de/005e] enabled next_unitid: 000f | |
| PCI: pci_scan_bus for bus 0 | |
| PCI: 00:00.0 [10de/005e] enabled | |
| PCI: 00:01.0 [10de/0051] enabled | |
| PCI: 00:01.1 [10de/0052] enabled | |
| PCI: 00:02.0 [10de/005a] enabled | |
| PCI: 00:02.1 [10de/005b] enabled | |
| PCI: 00:04.0 [10de/0059] enabled | |
| PCI: 00:04.1 [10de/0058] disabled | |
| PCI: 00:06.0 [10de/0053] enabled | |
| PCI: 00:07.0 [10de/0054] enabled | |
| PCI: 00:08.0 [10de/0055] enabled | |
| PCI: 00:09.0 [10de/005c] enabled | |
| PCI: 00:0a.0 [10de/0057] enabled | |
| PCI: 00:0e.0 [10de/005d] enabled | |
| PNP: 002e.0 enabled | |
| PNP: 002e.3 disabled | |
| PNP: 002e.4 enabled | |
| PNP: 002e.5 disabled | |
| PNP: 002e.7 enabled | |
| PNP: 002e.8 enabled | |
| PNP: 002e.a enabled | |
| smbus: PNP: 002e.8[0]->I2C: 01:2b enabled | |
| smbus: PNP: 002e.8[0]->I2C: 01:54 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:50 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:51 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:52 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:53 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:54 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:55 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:56 enabled | |
| smbus: PCI: 00:01.1[0]->I2C: 02:57 enabled | |
| smbus: PCI: 00:01.1[1]->I2C: 03:51 enabled | |
| PCI: pci_scan_bus for bus 1 | |
| PCI: 01:05.0 [104c/8023] enabled | |
| PCI: pci_scan_bus returning with max=01 | |
| PCI: pci_scan_bus for bus 2 | |
| PCI: 02:00.0 [10de/0141] enabled | |
| PCI: pci_scan_bus returning with max=02 | |
| PCI: pci_scan_bus returning with max=02 | |
| PCI: 40:00.0 [1022/7450] enabled | |
| PCI: 40:00.0 [1022/7450] enabled next_unitid: 0002 | |
| PCI: pci_scan_bus for bus 64 | |
| PCI: 40:00.0 [1022/7450] enabled | |
| PCI: 40:00.1 [1022/7451] enabled | |
| PCI: 40:01.0 [1022/7450] enabled | |
| PCI: 40:01.1 [1022/7451] enabled | |
| PCI: pci_scan_bus for bus 65 | |
| PCI: pci_scan_bus returning with max=41 | |
| PCI: 41: 133MHz PCI-X | |
| PCI: pci_scan_bus for bus 66 | |
| Disabling static device: PCI: 42:06.0 | |
| Disabling static device: PCI: 42:06.1 | |
| PCI: pci_scan_bus returning with max=42 | |
| PCI: 42: 100MHz PCI-X | |
| PCI: pci_scan_bus returning with max=42 | |
| PCI: 80:00.0 [10de/005e] enabled | |
| PCI: 80:00.0 [10de/005e] enabled next_unitid: 000f | |
| PCI: pci_scan_bus for bus 128 | |
| PCI: 80:00.0 [10de/005e] enabled | |
| PCI: 80:01.0 [10de/00d3] enabled | |
| PCI: 80:01.1 [10de/0052] disabled | |
| PCI: 80:07.0 [10de/0054] disabled | |
| PCI: 80:08.0 [10de/0055] disabled | |
| PCI: 80:0a.0 [10de/0057] enabled | |
| PCI: 80:0e.0 [10de/005d] enabled | |
| PCI: pci_scan_bus for bus 129 | |
| PCI: pci_scan_bus returning with max=81 | |
| PCI: pci_scan_bus returning with max=81 | |
| PCI: pci_scan_bus returning with max=81 | |
| done | |
| Allocating resources... | |
| Reading resources... | |
| PCI: 00:09.0 1c <- [0x000000f000 - 0x000000efff] bus 1 io | |
| PCI: 00:09.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 1 prefmem | |
| PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io | |
| PCI: 40:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 66 io | |
| PCI: 40:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 66 prefmem | |
| PCI: 40:01.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 66 mem | |
| PCI: 80:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 129 io | |
| PCI: 80:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 129 prefmem | |
| PCI: 80:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 129 mem | |
| Done reading resources. | |
| Allocating VGA resource PCI: 02:00.0 | |
| Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0e.0 | |
| Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 | |
| Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 | |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device | |
| Setting resources... | |
| VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device | |
| PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000002fff] io <node 0 link 0> | |
| PCI: 00:18.0 1ca <- [0x0000004000 - 0x0000003fff] io <node 0 link 2> | |
| PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0> | |
| PCI: 00:18.0 1b0 <- [0x00f0000000 - 0x00f52fffff] mem <node 0 link 0> | |
| PCI: 00:18.0 1aa <- [0x00fc200000 - 0x00fc1fffff] prefmem <node 0 link 2> | |
| PCI: 00:18.0 1a2 <- [0x00fc000000 - 0x00fc0fffff] mem <node 0 link 2> | |
| PCI: 00:01.0 10 <- [0x0000002400 - 0x000000247f] io | |
| PCI: 00:01.0 14 <- [0x00f5200000 - 0x00f5200fff] mem | |
| PCI: 00:01.0 60 <- [0x0000001000 - 0x00000010ff] io | |
| PCI: 00:01.0 64 <- [0x0000001400 - 0x00000014ff] io | |
| PCI: 00:01.0 68 <- [0x0000001800 - 0x00000018ff] io | |
| PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io | |
| PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq | |
| PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq | |
| PNP: 002e.4 60 <- [0x00000003f8 - 0x00000003ff] io | |
| PNP: 002e.4 70 <- [0x0000000004 - 0x0000000004] irq | |
| PNP: 002e.7 60 <- [0x0000000060 - 0x0000000060] io | |
| PNP: 002e.7 62 <- [0x0000000064 - 0x0000000064] io | |
| PNP: 002e.7 70 <- [0x0000000001 - 0x0000000001] irq | |
| PNP: 002e.7 72 <- [0x000000000c - 0x000000000c] irq | |
| PNP: 002e.8 60 <- [0x0000000290 - 0x000000029f] io | |
| PNP: 002e.a 60 <- [0x0000000400 - 0x000000047f] io | |
| PCI: 00:01.1 10 <- [0x0000002800 - 0x000000281f] io | |
| PCI: 00:01.1 20 <- [0x0000002480 - 0x00000024bf] io | |
| PCI: 00:01.1 24 <- [0x00000024c0 - 0x00000024ff] io | |
| PCI: 00:02.0 10 <- [0x00f5201000 - 0x00f5201fff] mem | |
| PCI: 00:02.1 10 <- [0x00f5206000 - 0x00f52060ff] mem | |
| PCI: 00:04.0 10 <- [0x0000001c00 - 0x0000001cff] io | |
| PCI: 00:04.0 14 <- [0x0000002000 - 0x00000020ff] io | |
| PCI: 00:04.0 18 <- [0x00f5202000 - 0x00f5202fff] mem | |
| PCI: 00:06.0 20 <- [0x0000002820 - 0x000000282f] io | |
| PCI: 00:07.0 10 <- [0x0000002850 - 0x0000002857] io | |
| PCI: 00:07.0 14 <- [0x00000028a0 - 0x00000028a3] io | |
| PCI: 00:07.0 18 <- [0x0000002860 - 0x0000002867] io | |
| PCI: 00:07.0 1c <- [0x00000028b0 - 0x00000028b3] io | |
| PCI: 00:07.0 20 <- [0x0000002830 - 0x000000283f] io | |
| PCI: 00:07.0 24 <- [0x00f5203000 - 0x00f5203fff] mem | |
| PCI: 00:08.0 10 <- [0x0000002870 - 0x0000002877] io | |
| PCI: 00:08.0 14 <- [0x00000028c0 - 0x00000028c3] io | |
| PCI: 00:08.0 18 <- [0x0000002880 - 0x0000002887] io | |
| PCI: 00:08.0 1c <- [0x00000028d0 - 0x00000028d3] io | |
| PCI: 00:08.0 20 <- [0x0000002840 - 0x000000284f] io | |
| PCI: 00:08.0 24 <- [0x00f5204000 - 0x00f5204fff] mem | |
| PCI: 00:09.0 20 <- [0x00f5100000 - 0x00f51fffff] bus 1 mem | |
| PCI: 01:05.0 10 <- [0x00f5104000 - 0x00f51047ff] mem | |
| PCI: 01:05.0 14 <- [0x00f5100000 - 0x00f5103fff] mem | |
| PCI: 00:0a.0 10 <- [0x00f5205000 - 0x00f5205fff] mem | |
| PCI: 00:0a.0 14 <- [0x0000002890 - 0x0000002897] io | |
| PCI: 00:0e.0 24 <- [0x00e0000000 - 0x00efffffff] bus 2 prefmem | |
| PCI: 00:0e.0 20 <- [0x00f0000000 - 0x00f50fffff] bus 2 mem | |
| PCI: 02:00.0 10 <- [0x00f0000000 - 0x00f3ffffff] mem | |
| PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64 | |
| PCI: 02:00.0 1c <- [0x00f4000000 - 0x00f4ffffff] mem64 | |
| PCI: 02:00.0 30 <- [0x00f5000000 - 0x00f501ffff] romem | |
| PCI: 40:00.1 10 <- [0x00fc000000 - 0x00fc000fff] mem64 | |
| PCI: 40:01.1 10 <- [0x00fc001000 - 0x00fc001fff] mem64 | |
| PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> | |
| PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> | |
| PCI: 00:19.0 1d0 <- [0x0000003000 - 0x0000003fff] io <node 1 link 0> | |
| PCI: 00:19.0 198 <- [0x00fc200000 - 0x00fc1fffff] prefmem <node 1 link 0> | |
| PCI: 00:19.0 190 <- [0x00fc100000 - 0x00fc1fffff] mem <node 1 link 0> | |
| PCI: 80:01.0 10 <- [0x0000003c00 - 0x0000003c7f] io | |
| PCI: 80:01.0 14 <- [0x00fc100000 - 0x00fc100fff] mem | |
| PCI: 80:01.0 60 <- [0x0000003000 - 0x00000030ff] io | |
| PCI: 80:01.0 64 <- [0x0000003400 - 0x00000034ff] io | |
| PCI: 80:01.0 68 <- [0x0000003800 - 0x00000038ff] io | |
| PCI: 80:0a.0 10 <- [0x00fc101000 - 0x00fc101fff] mem | |
| PCI: 80:0a.0 14 <- [0x0000003c80 - 0x0000003c87] io | |
| Done setting resources. | |
| Done allocating resources. | |
| Enabling resources... | |
| PCI: 00:18.0 cmd <- 140 | |
| PCI: 00:00.0 subsystem <- 10f1/2895 | |
| PCI: 00:00.0 cmd <- 146 | |
| PCI: 00:01.0 subsystem <- 10f1/2895 | |
| PCI: 00:01.0 cmd <- 14f | |
| ck804 lpc decode:PNP: 002e.0, base=0x000003f0, end=0x000003f7 | |
| ck804 lpc decode:PNP: 002e.4, base=0x000003f8, end=0x000003ff | |
| ck804 lpc decode:PNP: 002e.7, base=0x00000060, end=0x00000060 | |
| ck804 lpc decode:PNP: 002e.7, base=0x00000064, end=0x00000064 | |
| lpc47b397 SensorBus Register Access enabled | |
| ck804 lpc decode:PNP: 002e.8, base=0x00000290, end=0x0000029f | |
| ck804 lpc decode:PNP: 002e.a, base=0x00000400, end=0x0000047f | |
| PCI: 00:01.1 subsystem <- 10f1/2895 | |
| PCI: 00:01.1 cmd <- 141 | |
| PCI: 00:02.0 subsystem <- 10f1/2895 | |
| PCI: 00:02.0 cmd <- 142 | |
| PCI: 00:02.1 subsystem <- 10f1/2895 | |
| PCI: 00:02.1 cmd <- 142 | |
| PCI: 00:04.0 subsystem <- 10f1/2895 | |
| PCI: 00:04.0 cmd <- 143 | |
| PCI: 00:06.0 subsystem <- 10f1/2895 | |
| PCI: 00:06.0 cmd <- 141 | |
| PCI: 00:07.0 subsystem <- 10f1/2895 | |
| PCI: 00:07.0 cmd <- 143 | |
| PCI: 00:08.0 subsystem <- 10f1/2895 | |
| PCI: 00:08.0 cmd <- 143 | |
| PCI: 00:09.0 bridge ctrl <- 0003 | |
| PCI: 00:09.0 cmd <- 146 | |
| PCI: 01:05.0 cmd <- 142 | |
| PCI: 00:0a.0 subsystem <- 10f1/2895 | |
| PCI: 00:0a.0 cmd <- 143 | |
| PCI: 00:0e.0 bridge ctrl <- 000b | |
| PCI: 00:0e.0 cmd <- 147 | |
| PCI: 02:00.0 cmd <- 143 | |
| PCI: 40:00.1 subsystem <- 10f1/2895 | |
| PCI: 40:00.1 cmd <- 146 | |
| PCI: 40:01.0 bridge ctrl <- 0003 | |
| PCI: 40:01.0 cmd <- 140 | |
| PCI: 40:01.1 subsystem <- 10f1/2895 | |
| PCI: 40:01.1 cmd <- 146 | |
| PCI: 00:18.1 subsystem <- 10f1/2895 | |
| PCI: 00:18.1 cmd <- 140 | |
| PCI: 00:18.2 subsystem <- 10f1/2895 | |
| PCI: 00:18.2 cmd <- 140 | |
| PCI: 00:18.3 cmd <- 140 | |
| PCI: 00:19.0 cmd <- 140 | |
| PCI: 80:00.0 subsystem <- 10f1/2895 | |
| PCI: 80:00.0 cmd <- 146 | |
| PCI: 80:01.0 subsystem <- 10f1/2895 | |
| PCI: 80:01.0 cmd <- 14f | |
| PCI: 80:0a.0 subsystem <- 10f1/2895 | |
| PCI: 80:0a.0 cmd <- 143 | |
| PCI: 80:0e.0 bridge ctrl <- 0003 | |
| PCI: 80:0e.0 cmd <- 140 | |
| PCI: 00:19.1 subsystem <- 10f1/2895 | |
| PCI: 00:19.1 cmd <- 140 | |
| PCI: 00:19.2 subsystem <- 10f1/2895 | |
| PCI: 00:19.2 cmd <- 140 | |
| PCI: 00:19.3 cmd <- 140 | |
| done. | |
| Initializing devices... | |
| Root Device init | |
| APIC_CLUSTER: 0 init | |
| Initializing CPU #0 | |
| CPU: vendor AMD device 20f12 | |
| Enabling cache | |
| Setting fixed MTRRs(0-88) type: UC | |
| Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM | |
| Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM | |
| DONE fixed MTRRs | |
| Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB | |
| Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB | |
| Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC | |
| DONE variable MTRRs | |
| Clear out the extra MTRR's | |
| MTRR check | |
| Fixed MTRRs : Enabled | |
| Variable MTRRs: Enabled | |
| microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 | |
| microcode: patch id that want to apply= 0x0000004d | |
| microcode: updated to patch id = 0x0000004d success | |
| Setting up local apic... apic_id: 0 done. | |
| Clearing memory 2048K - 2097152K: ------------------------------- done | |
| CPU #0 Initialized | |
| start_eip=0x0001a000 | |
| Initializing CPU #1 | |
| CPU: vendor AMD device 20f12 | |
| Enabling cache | |
| Setting fixed MTRRs(0-88) type: UC | |
| Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM | |
| Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM | |
| DONE fixed MTRRs | |
| Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB | |
| Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB | |
| Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC | |
| DONE variable MTRRs | |
| Clear out the extra MTRR's | |
| MTRR check | |
| Fixed MTRRs : Enabled | |
| Variable MTRRs: Enabled | |
| microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 | |
| microcode: patch id that want to apply= 0x0000004d | |
| microcode: updated to patch id = 0x0000004d success | |
| Setting up local apic... apic_id: 17 done. | |
| CPU #1 Initialized | |
| start_eip=0x0001a000 | |
| Initializing CPU #2 | |
| CPU: vendor AMD device 20f12 | |
| Enabling cache | |
| Setting fixed MTRRs(0-88) type: UC | |
| Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM | |
| Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM | |
| DONE fixed MTRRs | |
| Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB | |
| Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB | |
| Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC | |
| DONE variable MTRRs | |
| Clear out the extra MTRR's | |
| MTRR check | |
| Fixed MTRRs : Enabled | |
| Variable MTRRs: Enabled | |
| microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 | |
| microcode: patch id that want to apply= 0x0000004d | |
| microcode: updated to patch id = 0x0000004d success | |
| Setting up local apic... apic_id: 18 done. | |
| Clearing memory 2097152K - 5242880K: ----------------++++++++++++++++ done | |
| CPU #2 Initialized | |
| start_eip=0x0001a000 | |
| Initializing CPU #3 | |
| Waiting for 1 CPUS to stop | |
| CPU: vendor AMD device 20f12 | |
| Enabling cache | |
| Setting fixed MTRRs(0-88) type: UC | |
| Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM | |
| Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM | |
| DONE fixed MTRRs | |
| Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB | |
| Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB | |
| Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC | |
| DONE variable MTRRs | |
| Clear out the extra MTRR's | |
| MTRR check | |
| Fixed MTRRs : Enabled | |
| Variable MTRRs: Enabled | |
| microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 | |
| microcode: patch id that want to apply= 0x0000004d | |
| microcode: updated to patch id = 0x0000004d success | |
| Setting up local apic... apic_id: 19 done. | |
| CPU #3 Initialized | |
| All AP CPUs stopped | |
| PCI: 00:18.0 init | |
| PCI: 00:01.0 init | |
| set power on after power fail | |
| RTC Init | |
| RTC: Checksum invalid zeroing cmos | |
| Invalid CMOS LB checksum | |
| PNP: 002e.0 init | |
| PNP: 002e.4 init | |
| PNP: 002e.7 init | |
| PNP: 002e.8 init | |
| PNP: 002e.a init | |
| PCI: 00:02.1 init | |
| PCI: 00:06.0 init | |
| IDE1 IDE0 | |
| PCI: 00:07.0 init | |
| SATA S SATA P | |
| PCI: 00:08.0 init | |
| SATA S SATA P | |
| PCI: 00:09.0 init | |
| dev_root mem base = 0x00e0000000 | |
| [0x50] <-- 0xe0000000 | |
| PCI: 00:0a.0 init | |
| PCI: 00:0e.0 init | |
| PCI: 40:01.0 init | |
| PCI: 00:18.1 init | |
| PCI: 00:18.2 init | |
| PCI: 00:18.3 init | |
| NB: Function 3 Misc Control.. done. | |
| PCI: 00:19.0 init | |
| PCI: 80:01.0 init | |
| PCI: 80:0a.0 init | |
| PCI: 80:0e.0 init | |
| PCI: 00:19.1 init | |
| PCI: 00:19.2 init | |
| PCI: 00:19.3 init | |
| NB: Function 3 Misc Control.. done. | |
| PCI: 01:05.0 init | |
| PCI: 02:00.0 init | |
| rom address for PCI: 02:00.0 = f5000000 | |
| copying VGA ROM Image from 0xf5000000 to 0xc0000, 0xf800 bytes | |
| entering emulator | |
| halt_sys: file /home/myles/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387 | |
| Devices initialized | |
| Writing IRQ routing tables to 0xf0000...done. | |
| Wrote the mp table end at: 00000020 - 0000065c | |
| Moving GDT to 0x65c...ok | |
| Wrote linuxbios table at: 00000690 - 00000f78 checksum 6a04 | |
| Welcome to elfboot, the open sourced starter. | |
| January 2002, Eric Biederman. | |
| Version 1.3 | |
| rom_stream: 0xfffc0000 - 0xfffdffff | |
| Found ELF candiate at offset 0 | |
| Loading Etherboot version: 5.4.2 | |
| Dropping non PT_LOAD segment | |
| New segment addr 0x10000 size 0x5f340 offset 0x0 filesize 0xf960 | |
| (cleaned up) New segment addr 0x10000 size 0x5f340 offset 0x0 filesize 0xf960 | |
| Loading Segment: addr: 0x00000000bff9c000 memsz: 0x000000000002c000 filesz: 0x000000000000f960 | |
| Clearing Segment: addr: 0x00000000bffab960 memsz: 0x000000000001c6a0 | |
| Loading Segment: addr: 0x000000000003c000 memsz: 0x0000000000033340 filesz: 0x0000000000000000 | |
| Clearing Segment: addr: 0x000000000003c000 memsz: 0x0000000000033340 | |
| Jumping to boot code at 0x100b0 | |
| CPU 1877 Mhz | |
| Etherboot 5.4.2 (GPL) http://etherboot.org | |
| Drivers: TG3 FILO Images: NBI ELF | |
| Protocols: DHCP TFTP | |
| Relocating _text from: [000101b0,0006f340) to [bfea0e70,bff00000) | |
| Scanning PCI: found 30 devices | |
| Probing pci disk... | |
| [FILO]boot eax = 0x8904063c | |
| boot ebx = 0x00800401 | |
| boot arg = 0x00000000 | |
| FILO version 0.4.1 (myles@blue.cs.byu.edu) Thu May 25 12:05:28 MDT 2006 | |
| Press <Enter> for default boot, or <Esc> for boot prompt... 7� �6� �5� �4� �3� �2� �1� �timed out | |
| boot: hdb1:/linux_2.6.16.elf | |
| dev=hdb1, path=/linux_2.6.16.elf | |
| found PCI <abort> | |
| Probing pci disk... | |
| [FILO]boot eax = 0x8904063c | |
| boot ebx = 0x00800401 | |
| boot arg = 0x00000000 | |
| FILO version 0.4.1 (myles@blue.cs.byu.edu) Thu May 25 12:05:28 MDT 2006 | |
| Press <Enter> for default boot, or <Esc> for boot prompt... 7� �6� �5� �4� �3� �2� �1� � | |
| boot: hdb1:/linux_2.6.16.elf | |
| dev=hdb1, path=/linux_2.6.16.elf | |
| found PCI IDE controller 000010de:00000053 prog_if=0x0000008a | |
| primary channel: compatibility mode | |
| cmd_base=0x000001f0 ctrl_base=0x000003f4 | |
| Waiting for ide0 to become ready for reset... ok | |
| Testing for hda | |
| Probing for hda | |
| IDE: status=0x00000051, err=0x00000004 | |
| Testing for hda | |
| Probing for hda | |
| hda: ATAPI: _NEC DVD_RW ND-3540A | |
| Testing for hdb | |
| Probing for hdb | |
| Init device params... ok | |
| hdb: LBA: WDC WD1200BB-00CAA0 | |
| Partition 1 start u length u | |
| Mounted ext2fs | |
| Image checksum: 0000ec39 | |
| Loading Linux version 2.6.16-1.2111_FC4smp (bhcompile@hs20-bc1-4.build.redhat.com) #1 SMP Sat May 20 20:16:16 EDT 2006... | |
| segment 1 addr:0x00010000 file:0x000011ec mem:0x000122c4 phdr:0x7ffffb94 loading... clearing... ok | |
| segment 2 addr:0x00020000 file:0x00000000 mem:0x00001070 phdr:0x7ffffbb4 loading... clearing... ok | |
| segment 3 addr:0x00100000 file:0x001a06ac mem:0x00700000 phdr:0x7ffffbd4 loading... clearing... ok | |
| segment 4 addr:0x00800000 file:0x001380a5 mem:0x001380a5 phdr:0x7ffffbf4 loading... clearing... ok | |
| Loaded 2988349 bytes in 2111ms (1415KB/s) | |
| current time: 000001e3 | |
| entry point is 0x00010000 | |
| Jumping to entry point... | |
| Firmware type: LinuxBIOS | |
| ÿ |
Categories: Pel | Myles | LinuxBIOS
